|
Closed Throttle and Idle Actuator |
  
|
Closed Throttle and Idle Actuator
|
Closed Throttle and Idle Actuator |
|
Description
The Closed Throttle and Idle Actuator group box from the Setting page provides a function that you can use to tell the ECM that the current TPS value should be considered as the idle.
To reset the closed throttle and idle actuator
| 1. | Read MPEM document from the vehicle. |
| 2. | Click on the Setting page thumbnail. |
| 3. | Click on the Closed Throttle and Idle Actuator zone Reset button. |
| 4. | Wait until B.U.D.S. confirms that the function succeeded. |
| 5. | Perform the ECM tracking procedure. |
Note
The adjustment is done simultaneously in the ECM and in the document.