B.U.D.S. > User Interface > Document > History > History Sub-Page

Description

The Part Replacement page provides functions that you can use to read, add and clear(*) parts to (from) the replacement history. Each part in the replacement history is assigned a type (ECM, MPEM or Engine), a serial number and the vehicle hours it was added at.

To add an engine to the replacement history

When you change the engine serial number in the Vehicle page, B.U.D.S. automatically updates the Part Replacement page with the old engine serial number and the vehicle hours it was changed at. If needed, you can also manually add an engine to the part replacement history. To do so, follow these steps:

1.	Read MPEM document from the vehicle.

2.	Click on the History page thumbnail.

3.	Click on the Part Replacement sub-page thumbnail.

4.	Click on the Add Part in History button to open the Add Part in History window.

5.	In the Add Part in History window, click on the Part Type zone Engine button.

6.	Enter the part serial number in the Serial Number zone.

7.	Click on the OK button.

8.	Write MPEM document into the vehicle.

To add a MPEM to the replacement history

When replacing a MPEM with the Replace command from the Module | MPEM menu, B.U.D.S. automatically updates the Part Replacement page with the old MPEM serial number and the vehicle hours it was changed at. If needed, you can also manually add a MPEM to the part replacement history. To do so, follow these steps:

1.	Read MPEM document from the vehicle.

2.	Click on the History page thumbnail.

3.	Click on the Part Replacement sub-page thumbnail.

4.	Click on the Add Part in History button to open the Add Part in History window.

5.	In the Add Part in History window, click on the Part Type zone MPEM button.

6.	Enter the part serial number in the Serial Number zone.

7.	Click on the OK button.

8.	Write MPEM document into the vehicle.

* - only with privilege Megatech.

To add an ECM to the replacement history

When replacing a ECM with the Replace command from the Module | ECM menu, B.U.D.S. automatically updates the Part Replacement page with the old ECM serial number and the vehicle hours it was changed at. If needed, you can also manually add a ECM to the part replacement history. To do so, follow these steps:

1.	Read MPEM document from the vehicle.

2.	Click on the History page thumbnail.

3.	Click on the Part Replacement sub-page thumbnail.

4.	Click on the Add Part in History button to open the Add Part in History window.

5.	In the Add Part in History window, click on the Part Type zone ECM button.

6.	Enter the part serial number in the Serial Number zone.

7.	Click on the OK button.

8.	Write MPEM document into the vehicle.

To add a cluster to the replacement history

When adding manually a cluster to the part replacement history, follow these steps:

1.	Read MPEM document from the vehicle.

2.	Click on the History page thumbnail.

3.	Click on the Part Replacement sub-page thumbnail.

4.	Click on the Add Part in History button to open the Add Part in History window.

5.	In the Add Part in History window, click on the Part Type zone Cluster button.

6.	Enter the part serial number in the Serial Number zone.

7.	Click on the OK button.

8.	Write MPEM document into the vehicle.