B.U.D.S. > User Interface > Document > Activation > Activation Page

Engine activation and monitoring functions

The Engine drawing contains red activation hot spots and blue monitoring hot spots which are attached to the following functions:

Hot spot	Activation or monitoring function
Outer MAG fuel injector	Pulse outer MAG fuel injector, 50 times in a row.
Inner MAG fuel injector	Pulse inner MAG fuel injector, 50 times in a row.
Outer PTO fuel injector	Pulse outer PTO fuel injector, 50 times in a row.
Inner PTO fuel injector	Pulse inner PTO fuel injector, 50 times in a row.
MAG ignition coil	Pulse MAG ignition coil, 10 times in a row.
PTO ignition coil	Pulse PTO ignition coil, 10 times in a row.
RAVE® solenoid	Activate RAVE solenoid until the button is released.
Engine temperature	Display the engine temperature in the status bar.
Throttle opening	Display the throttle opening angle in the status bar.

Vehicle activation functions

The Activation page shows the Fuel Pump group box which can be used to Enable or Disable the fuel pump.

Also shown is the Activate group box with push buttons which are attached to the following activation functions:

Button	Activation function
Fuel Press. Relief	Initiate the fuel pressure relief sequence which disables the fuel pump, then asks the user to start the engine and wait until it stops. Clicking on the OK button re-enables the fuel pump.
Fuel Pump	Activate the fuel pump for 5 seconds.
Buzzer	Activate the buzzer until the button is released.
Relay 2	Turn on relay 2 until the button is released.
Relay 3	Turn on relay 3 until the button is released.
Start Self-test	Initiate a self-test.

Gauges activation functions

The Gauges drawing contains hot spots which are attached to the following activation functions:

Hot spot	Activation function
Engine warning LED	Turn on engine warning LED until the hot spot is released.
Low oil pressure LED	Turn on low oil pressure LED until the hot spot is released.
High temperature LED	Turn on high temperature LED until the hot spot is released.
Battery voltage LED	Turn on battery voltage LED until the hot spot is released.
DESS®/RER LED	Turn on DESS/RER LED until the hot spot is released.
Tachometer	Display 3000 RPM on tachometer until the hot spot is released.