V1004 Activation Page

Navigation:  B.U.D.S. > User Interface > Document > Activation > Activation Page >

V1004 Activation Page

Previous pageReturn to chapter overviewNext page

Engine activation and monitoring functions

The Engine drawing contains red activation hot spots and blue monitoring hot spots which are attached to the following functions:

Hot spot

 Activation or monitoring function

MAG fuel injector

 Pulse MAG fuel injector, 50 times in a row.

PTO fuel injector

 Pulse PTO fuel injector, 50 times in a row.

MAG ignition coil

 Pulse MAG ignition coil, 10 times in a row.

PTO ignition coil

 Pulse PTO ignition coil, 10 times in a row.

Engine temperature

 Display the engine temperature in the status bar.

Throttle opening

 Display the throttle opening angle in the status bar.

Intake air pressure

 Display the intake air pressure in the status bar.

Oil pressure switch

 Display the oil pressure switch status in the status bar.

Vehicle activation functions

The Activation page shows the Fuel Pump group box which can be used to Enable or Disable the fuel pump.

Also shown is the Activate group box with push buttons which are attached to the following activation functions:

Button

 Activation function

Fuel Press. Relief

 Initiate the fuel pressure relief sequence which disables the fuel pump, then asks the user to start the engine and wait until it stops.  Clicking on the OK button re-enables the fuel pump.

Fuel Pump

 Activate the fuel pump for 5 seconds.

Buzzer

 Activate the buzzer until the button is released.

Relay 2

 Turn on relay 2 until the button is released.

Start Self-test

 Initiate a self-test.

Gauges activation functions

The Gauges drawing contains hot spots which are attached to the following activation functions:

Hot spot

 Activation function

Temperature gauge

 Display a high temperature value on gauge until the hot spot is released.

Engine warning LED

 Turn on engine warning LED until the hot spot is released.

High temperature LED

 Turn on high temperature LED until the hot spot is released.

DESS®/RER LED

 Turn on DESS/RER LED until the hot spot is released.

Tachometer

 Display 3000 RPM on tachometer until the hot spot is released.