B.U.D.S. > User Interface > Document > Activation > Activation Page

Info center activation functions

The Info Center drawing contains two hot spots which are attached to the following activation functions:

Hot spot	Activation function
Tachometer	Display 3000 RPM on tachometer for 2.5 seconds.
Maintenance signal	Turn on maintenance signal for 5 seconds.

Engine activation and monitoring functions

The Engine drawing contains red activation hot spots and blue monitoring hot spots which are attached to the following functions:

Hot spot	Activation or monitoring function
MAG fuel injector	Pulse MAG fuel injector as 3000 RPM during 500 ms.
PTO fuel injector	Pulse PTO fuel injector as 3000 RPM during 500 ms.
MAG air injector	Pulse MAG air injector as 3000 RPM during 500 ms.
PTO air injector	Pulse PTO air injector as 3000 RPM during 500 ms.
MAG ignition coil	Pulse MAG ignition coil as 3000 RPM during 500 ms.
PTO ignition coil	Pulse PTO ignition coil as 3000 RPM during 500 ms.
MAG RAVE® solenoid	Turn on RAVE solenoid for 1 second.
PTO RAVE® solenoid	Turn on RAVE solenoid for 1 second.
MAG TPS	Display the ADC value of MAG TPS in the status bar.
PTO TPS	Display the ADC value of PTO TPS in the status bar.
Intake air pressure	Display the intake air pressure in the status bar.
Intake air temperature	Display the intake air temperature in the status bar.

Vehicle activation functions

The Activate group box contains push buttons which are attached to the following activation functions:

Button	Activation function
Buzzer	Activate the buzzer for 5 seconds.
Hi-Temp Signal	Turn on info center high temperature signal for 5 seconds.
Fuel Pump	Activate the fuel pump for 5 seconds.
Start Self-test	Initiate a self-test.
Fuel Press. Relief	Successively activate MAG air injector for 5 seconds and MAG fuel injector for 15 seconds to relieve the fuel line pressure.