|
Activation Page |
  
|
Activation Page
|
Activation Page |
|
Description
The Activation page provides functions that you can use to activate individual module outputs and to monitor module inputs when the engine is not running. It also provides a self-test function that you can use to successively and automatically activate the outputs.
Activation functions are attached to standard push buttons and drawing hot spots while monitoring functions are attached to drawing hot spots only.
To activate an output
| 1. | Read MPEM document from the vehicle. |
| 2. | Click on the Activation page thumbnail. |
| 3. | The content of the Activation page depends on the type of vehicle. |
| 4. | Click on the desired push button or hot spot. |
| 5. | Click on the message box Yes button to confirm your action. |
Notes
Some vehicles have 2 activation pages. The second page can be accessed using the navigation buttons which are located on the lower right corner of the activation pages.
Some activations require that you press and hold the button or the hot spot as long as you want the component to be activated. Just release the button or the hot spot when you are finished.
