|
Connecting to a 947-DI or a 1503 |
  
|
Connecting to a 947-DI or a 1503
|
Connecting to a 947-DI or a 1503 |
|
To connect the MPI® to a personal watercraft equipped with a 947-DI or a 1503 engine
| 1. | Remove the diagnostic connector cap from the harness of the vehicle. |
| 2. | Connect the 6-pin adapter to the diagnostic connector of the vehicle. |
| 3. | Insert a DESS® key on the DESS post of the vehicle. |
Notes
Always reconnect the diagnostic connector cap when you are done.
Once the DESS key is inserted on the DESS post of the vehicle, the computer has approximately 30 seconds to initiate communication with the vehicle. If the computer did not detect the vehicle within this delay, then remove the DESS key from the DESS post of the vehicle and insert it again.
