B.U.D.S. > User Interface > Document > Faults > Faults Page

Description

The Summary table displays 3 parameters for each fault. The example below shows the parameters of a battery fault:

Code	State	Description
P0563 (02 14 06)	Active	RFI engine module power-up voltage above upper limit

To refresh the faults parameters

On a RFI vehicle you are responsible for updating the faults parameters. To do so, follow these steps:

1.	Click on the Refresh button.

2.	Wait until B.U.D.S. reads the faults parameters from the module.

To clear all occurred faults

1.	Click on the Clear Occurred Faults button.

2.	Click on the message box Yes button.

3.	Wait until B.U.D.S. clears all occurred faults into the module.

Note

Clearing occurred faults resets the Status of all occurred faults to inactive.